Vui lòng dùng định danh này để trích dẫn hoặc liên kết đến tài liệu này: http://thuvienso.vanlanguni.edu.vn/handle/Vanlang_TV/18487
Nhan đề: An Experimental Study of the Uniaxial Failure Behaviour of Rock-Coal Composite Samples with Pre-existing Cracks in the Coal
Tác giả: Chen, Shaojie
Ge, Yao
Yin, Dawei
Yang, Huisan
Từ khoá: Mechanical properties
Defects
Splitting
Crack propagation
Compression tests
Emission analysis
Crack initiation
Aluminum
Coal mining
Cracks
Sandstone
Mechanics
Vertical penetration
Studies
Engineering
Composite structures
Stone
Coal mines
Shear strength
Structural stability
Strength
Spalling
Năm xuất bản: 2019
Nhà xuất bản: Hindawi Limited
Tóm tắt: Many hazards encountered during coal mining can be caused by the instability and failure of the composite structure of the coal seam and the surrounding rock strata. The defects present in the coal affect the structural stability of the composite structure. In this study, uniaxial compression tests were conducted on sandstone-coal composite samples with pre-existing cracks in the coal, combined with tests performed with an acoustic emission (AE) device and a digital video camera. The strength, macrofailure initiation (MFI), and failure characteristics of composite samples, as influenced by the coal’s pre-existing cracks, were analysed. The coal’s pre-existing cracks were shown to reduce the strength, promote the occurrence of MFI, and affect the failure characteristics of the samples. Vertical penetration cracks had much more pronounced effects on strength and MFI occurrence, especially vertical penetration cracks that penetrated through the centre of the coal. Horizontal penetration cracks had a much reduced effect on strength and MFI occurrence. The MFI caused a step shape in the stress-strain curve accompanied with a peak energy index signal and occurred around the original coal cracks. The MFI models predominantly exhibited crack initiation from the pre-existing coal cracks and surface spalling caused by crack propagation. The intact composite sample failure presented as an instantaneous failure, whereas the composite samples containing the pre-existing cracks showed a progressive failure. The failures of composite samples occurred predominantly within the coal and displayed an X-typed shear failure accompanied by a small splitting failure. Both the coal and sandstone were destroyed in the composite sample with vertical penetration cracks through the centre of the coal. Failure of the coal occurred through a splitting failure accompanied by a small X-typed shear failure, while the sandstone showed a splitting failure induced by crack propagation in the coal.
Mô tả: Advances in Civil Engineering; New York Vol. 2019, (2019). DOI:10.1155/2019/8397598
Định danh: http://thuvienso.vanlanguni.edu.vn/handle/Vanlang_TV/18487
ISSN: 1687-8086
1687-8094 (eISSN)
Bộ sưu tập: Bài báo_lưu trữ

Các tập tin trong tài liệu này:
Tập tin Mô tả Kích thước Định dạng  
BBKH1209_TCCN_An Experimental Study ....pdf
  Giới hạn truy cập
An Experimental Study of the Uniaxial Failure Behaviour of Rock-Coal Composite Samples with Pre-existing Cracks in the Coal5.89 MBAdobe PDFXem/Tải về  Yêu cầu tài liệu


Khi sử dụng các tài liệu trong Thư viện số phải tuân thủ Luật bản quyền.