Vui lòng dùng định danh này để trích dẫn hoặc liên kết đến tài liệu này: http://thuvienso.vanlanguni.edu.vn/handle/Vanlang_TV/18870
Toàn bộ biểu ghi siêu dữ liệu
Trường DCGiá trị Ngôn ngữ
dc.contributor.authorHu, Xiuyan-
dc.contributor.authorRen, Xiaosong-
dc.date.accessioned2020-06-02T06:35:59Z-
dc.date.available2020-06-02T06:35:59Z-
dc.date.issued2019-
dc.identifier.issn1687-8086-
dc.identifier.issn1687-8094 (eISSN)-
dc.identifier.otherBBKH1162-
dc.identifier.urihttp://thuvienso.vanlanguni.edu.vn/handle/Vanlang_TV/18870-
dc.description"Hindawi Advances in Civil Engineering Volume 2019, Article ID 8052413, 14 pages https://doi.org/10.1155/2019/8052413"vi
dc.description.abstractIn the design of damped structures, the additional equivalent damping ratio (EDR) is an important factor in the evaluation of the energy dissipation effect. However, previous additional EDR estimation methods are complicated and not easy to be applied in practical engineering. Therefore, in this study, a method based on energy dissipation is developed to simplify the estimation of the additional EDR. First, an energy governing equation is established to calculate the structural energy dissipation. By means of dynamic analysis, the ratio of the energy consumed by dampers to that consumed by structural inherent damping is obtained under external excitation. Because the energy dissipation capacity of the installed dampers is reflected by the additional EDR, the abovementioned ratio can be used to estimate the additional EDR of the damped structure. Energy dissipation varies with time, which indicates that the ratio is related to the duration of ground motion. Hence, the energy dissipation during the most intensive period in the entire seismic motion duration is used to calculate the additional EDR. Accordingly, the procedure of the proposed method is presented. The feasibility of this method is verified by using a single-degree-of-freedom system. Then, a benchmark structure with dampers is adopted to illustrate the usefulness of this method in practical engineering applications. In conclusion, the proposed method is not only explicit in the theoretical concept and convenient in application but also reflects the time-varying characteristic of additional EDR, which possesses the value in practical engineering.vi
dc.language.isoenvi
dc.publisherHindawi Limitedvi
dc.subjectDamping capacityvi
dc.subjectEnergy dissipationvi
dc.subjectEarthquakesvi
dc.subjectRatiosvi
dc.subjectMethodsvi
dc.subjectMathematical analysisvi
dc.subjectCivil engineeringvi
dc.subjectGround motionvi
dc.subjectDampersvi
dc.subjectDissipation factorvi
dc.subjectDamping ratiovi
dc.subjectEquivalencevi
dc.titleEstimation of Additional Equivalent Damping Ratio of the Damped Structure Based on Energy Dissipationvi
dc.typeOthervi
Bộ sưu tập: Bài báo_lưu trữ

Các tập tin trong tài liệu này:
Tập tin Mô tả Kích thước Định dạng  
BBKH1162_TCCN_ Estimation of Additional Equivalent.pdf
  Giới hạn truy cập
Estimation of Additional Equivalent Damping Ratio of the Damped Structure Based on Energy Dissipation1.48 MBAdobe PDFXem/Tải về  Yêu cầu tài liệu


Khi sử dụng các tài liệu trong Thư viện số phải tuân thủ Luật bản quyền.